www.heartway.com.tw
8
ASSEMBLY INSTRUCTION
1.Installing the Saddle set and Seat
(Fig 2)
(See Fig 2)
Slide the seat into the Connection points (both sides) in the main frame (See Fig 2), put down
the saddle set and connect the front connection point. Make sure that tighten the tension
knob in the front connection point. (See Figure 3)
It may be necessary to install the seat either
prior to initial operation or after transporting your power chair to the customers.
Front connection point
(Fig 3)
2-1 Install the skirt guards (#10,#11)
Insert the skirt guard support tube into the bracket in the correct direction (See Fig 4). Tighten
the adjusted knob. (Fig 5)
(Fig 4) (Fig 5)
Connection
Adjusting Knob