35
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. C • 8/10
Log #3 (SRV2206-702)
: Position Log #3 as shown in Figure 6. See Figure 1 and Figure 7 for additional details. Position the
grate tine groove, located on the bottom of the log, over the base of the left grate tine. Pull the log forward until it contacts
the vertical portion of the grate tine. The back end of Log #3 rests on the log support. Move the end of Log #3 clockwise
until the bottom right corner is fl ush with the pilot bracket.
Figure 5. Log #2
Figure 6. Place Log #3
Figure 7. Log #3
Log #4 (SRV2206-704)
: Position Log #4 as shown in Figure 8. See Figure 4 for additional details. Position the tips of Log
#4 on the fl at spots as shown in Figure 8. Rotate the left end of Log #4 forward until the grate tine touches the log groove.
Figure 8. Place Log #4
FRONT END
FRONT END
OF LOG
OF LOG
SLOT
SLOT
NOSE OF LOG
NOSE OF LOG
TOUCHES VERTICAL
TOUCHES VERTICAL
LINE
LINE
BACK END
BACK END
OF LOG
OF LOG
GRATE TINE
GRATE TINE
GROOVE ON
GROOVE ON
LOG BOTTOM
LOG BOTTOM
FLAT SPOT
FLAT SPOT
(FOR LOG #6)
(FOR LOG #6)
POINT OF
POINT OF
LOGS REST
LOGS REST
ON FLAT
ON FLAT
SPOTS
SPOTS
GRATE TINE
GRATE TINE
TOUCHES
TOUCHES
LOG GROOVE
LOG GROOVE
CORNER OF
CORNER OF
LOG FLUSH
LOG FLUSH
WITH PILOT
WITH PILOT
BRACKET
BRACKET
3
3
4
4
