Heat Outdoors 902112, Safety Instructions And Operation Manual

9

Operation Instructions

Cleaning & maintenance

Heater housing, grills and internal reflector

•  Disconnect the appliance from the power supply system .
•  After the appliance has cooled down, the housing can be wiped clean with a  

damp cloth .

• 

Do not touch the bulb element with your fingers, since stains could build up from 

such a contact and may cause malfunction of the blub . 

•  Do not use any abrasive or hard cleaning products on any part of this heater .
•  Do not immerse the appliance in water .
•  Wait until the unit is completely dry before use .

Cleaning of heater lamp

• 

Disconnect the appliance from the power supply system .

• 

Wipe the lamp over with a damp cloth ensuring no detergents or cleaning fluids are 

used as they may cause damage to the lamp coating .

https://www.heat-outdoors.co.uk/help-desk/useful-articles/heater-and-lamp-

maintenance.html

Any maintenance or repairs should only be carried out by a qualified electrician if you’re 

unsure how to do so . For further information and guidance, visit our online help articles 

and videos .

Storage

If the heater will not be used for a long period of time, store it in a cool, dry location . To 

prevent dust and dirt build-up, use the original packaging to repack the heater.

Trouble Shooting

If the heater will not operate, please check the following before seeking repair or service:

•  Check if the power cord is plugged into an electrical outlet, if not plug in .
•  Check if electricity to the main fuse is working .
•  Make certain the power switches are turned on . If not, choose a setting .