Installation location
The heater must be installed no less than 0.5m from side walls and no less than 1.8m from the floor.
Important
Ensure the power cable is well mounted so that it will not come into contact with the heater. The power
cable can be fixed to the metal mounting bracket which is located behind the heater.
•
The heater should be installed by a qualified electrician.
• Do not install whilst the heater is connected to the power supply.
• The heater can be mounted in a horizontal or vertical manner.
•
The lowest part of the heater must be located at or above a minimum height of 1.8m from the floor, so
that the heater cannot be touched.
• When mounting horizontally or to a ceiling, do not position the heater at an angle more than 90’c and
less than 45’c as shown in Fig. A & B.
• The power cable must be at the lower end of the heater if the heater if it is installed at an angle or
vertically.
• Keep the power cable away from the body of the heater as this will get hot during use.
• The heater must be installed on the mounting brackets provided.
Wall Installation. Fig A
Ceiling Installation. Fig B
Floor
Floor
