2
598-1136-00
DRAFT COPY
A
B
ON
OFF
ON
OFF
DIM
GROUP
MODE
ALL
ON
ALL
OFF
PANIC
DIM
ON
OFF
ON
OFF
DIM
DIM
ON
OFF
ON
OFF
DIM
DIM
ON
OFF
ON
OFF
DIM
DIM
1
2
(Dip Switch 4 in DOWN position)
(Dip Switch 4 in UP position)
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
Setting Receiver(s) Dip Switches
The Control Panel transmitter has
preprogrammed dip switch settings for each
channel. In order for the Control Panel to
communicate with a receiver, the dip switches
on the receiver must correspond with the
preprogrammed dip switch settings of the
channel you wish to use. Note: There are no
dip switches on the Control Panel that re-
quire setting.
1.
Determine which receiver(s) will be op-
erated by which channel.
2.
Set receiver(s) dip switches 1, 2, and 3
to match the dip switch settings for the
channel you wish to operate the
receiver(s).
Preprogrammed Dip Switch
Settings
Channel (Includes
ON, OFF, DIM)
Setting The Time
The following buttons (located under the front cover) are used to set the time:
TIME SET, SELECT, and the – (LEFT) and + (RIGHT) arrow buttons.
1.
Press the TIME SET button. The hour
will highlight.
2.
Press the LEFT or RIGHT arrow buttons
to adjust the hour (Hint: Holding the arrow
button down will scroll through the num-
bers. Release the arrow button when the
desired hour is displayed).
Note: When in 12-hour mode the AM and
PM indicators will light indicating which
part of the day is currently selected.
3.
Press the SELECT button. The minute
will highlight.
4.
Press the LEFT or RIGHT arrow but-
tons to adjust the minute(Hint: Holding
the arrow button down will scroll through
the numbers. Release the arrow button when the desired hour is displayed).
5.
Press the SELECT button. The 12/24-hour mode becomes adjustable.
6.
Press the LEFT or RIGHT arrow buttons to toggle between 12-hour and 24-hour
display mode. Note: The AM or PM indicator will light when the 12-hour mode is
selected. If neither AM nor PM indicator is lit, the 24-hour mode is selected.
Note: If a mistake is made, return to the hour, minute, or 12/24-hour indicator at
any time by using the SELECT key to scroll to the desired position.
When the desired selections are completed, press the TIME SET button.
AM
PM
A
–
Select
Time Set
Program
+
– (Left) Arrow
Setting the Time
AM/PM/24-Hour Indicators
Select Button
Time Set
Button
+ (Right) Arrow