3
598-1136-00
DRAFT COPY
AM
PM
A
A
B
1
2
ON
OFF
ON
OFF
DIM
GROUP
MODE
ALL
ON
ALL
OFF
PANIC
DIM
ON
OFF
ON
OFF
DIM
DIM
ON
OFF
ON
OFF
DIM
DIM
ON
OFF
ON
OFF
DIM
DIM
–
Select
Time Set
Program
+
AM
PM
A
A
B
ON
OFF
ON
OFF
DIM
GROUP
MODE
ALL
ON
ALL
OFF
PANIC
DIM
ON
OFF
ON
OFF
DIM
DIM
ON
OFF
ON
OFF
DIM
DIM
ON
OFF
ON
OFF
DIM
DIM
–
Select
Time Set
Program
+
1
2
Group A Selected
Group Selection
Group Selection
Indicator ON
Group B Selected
Group Selection
Indicator OFF
Control Descriptions
GROUP:
Allows each channel to be used for 2 different groups of receivers (for
a total of 16 channels). It also allows for the programming of 2 separate groups of
8 channels, for a total of 16 programmable (ON/OFF) combinations. To choose
Group A, press the left side of the switch (the Group Indicator will be on). To choose
Group B, press the right side of the switch (the Group Indicator will be off).
ALL ON:
Turns ON all light fixtures programmed for either Group A or Group B.
Each channel LED indicator will light in sequential order as units are turned on.
To perform this function, select either Group A or Group B then press ALL ON.
If lights are off or dimmed (where applicable) they will be turned on full power.
ALL OFF:
Turns OFF all light fixtures programmed for either Group A or Group
B. Each channel LED indicator will light in sequential order as units are turned
on. To perform this function, select either Group A or Group B then press ALL
OFF. If lights are on or dimmed (where applicable) they will be turned off.
PANIC:
Turns ON all light fixtures programmed for either Group A or Group B.
Light fixtures within the selected group that have Flash capability will FLASH
when this command is received. Each channel LED indicator will alternately light
in sequential order. ALL OFF will turn off all channels within the selected group
and reset all light fixtures to normal operating mode.
Channel ON:
Turns ON all light fixtures that are configured to work with a
particular channel. To perform this function, press the ON button located by the
channel number desired (between 1 and 8). When ON is pressed, the channel
LED will momentarily light.
Channel OFF:
Turns OFF all light fixtures that are configured to work with a
particular channel. To perform this function, press the OFF button located by the
channel number desired (between 1 and 8). When OFF is pressed, the channel
LED will momentarily light.
3.
Determine whether the receiver(s) will be in Group A or B.
4.
Set dip switch 4 on the receiver to the same setting as Group A or B.
