4
598-1136-00
DRAFT COPY
Programming Functions
MODE:
Pressing the MODE button toggles between the different programmed
mode settings. The possible settings are MODE 1, MODE 2, both MODE 1 and
2, and off. When the MODE 1 LED is on, all programmed channels for MODE
1 will be activated. When the MODE 2 LED is on, all programmed channels for
MODE 2 will be activated. To activate both MODE 1 and MODE 2 programs,
press the MODE button until both LED’s are on. To turn off all programmed
channels, press the MODE button until both LED’s are off.
Program Mode:
Allows the user to program ON/OFF times for selected
channels. The clock display is used to set the times for the programming modes.
The current time will not be lost during programming.
Each channel is capable of saving up to two separate ON/OFF program settings.
The possible program settings are: 2-Group A, or 2-Group B, or 1-Group A and
1-Group B.
Pushing the PROGRAM button enters the program mode and allows the user to
set up ON and OFF times for each switch (the DIM button is not available for
programming).
1.
Choose Group A or B depending on which channel will be programmed.
2.
Press PROGRAM button. The LED next to the PROGRAM button will light
and the Mode 1 LED will light. Note: Pressing the program button repeat-
edly will toggle modes. The sequence is Program MODE OFF, MODE 1,
MODE 2, repeat.
3.
The hour display will highlight. Press the LEFT or RIGHT arrow buttons to
adjust the hour.
4.
Press the SELECT button. The minute will highlight.
5.
Press the LEFT or RIGHT arrow buttons to adjust the minute.
6.
When the desired ON time is displayed press the ON button located by the
channel number desired (between 1 and 8). The ON time is now programmed
(the Group Indicator will Flash when the ON time has been saved).
7.
Press the LEFT or RIGHT arrow buttons to adjust the minute.
8.
Press the SELECT button. The hour will highlight.
9.
Press the LEFT or RIGHT arrow buttons to adjust the hour.
Channel DIM:
Dims all light fixtures that are equipped with the dimming feature
that are configured to work with a particular channel. To perform this function,
press the DIM button located by the channel number desired (between 1 and 8).
Pressing DIM repeatedly will toggle thru the different dim levels if the light fixture
is capable of more than one level of dim. Each time the DIM button is pressed,
the channel LED will momentarily light.
The DIM button saves the last dim setting used. To recall the last dim setting,
press the DIM channel once.
Note: The light fixture must be capable of dimming for the DIM button to work
properly.
