background image

6

598-1136-00

DRAFT COPY

Specifications

Range .......................................................................... Up to 100 feet (30.5 m)
Rated Voltage ........................................................................................ 9 VDC
Battery Backup ................................................................. 9 VDC Rechargable

POSSIBLE CAUSE

1. Circuit breaker or fuse is

turned off. Power supply
not plugged in.

2. Switch on device is turned

off. Power supply is defec-
tive.

1. Backup battery is not in-

stalled.

1. Dip switch settings on re-

ceiver do not match con-
troller.

2. Wrong group is selected.

Troubleshooting Guide

SYMPTOM

Controller does
not come on.

C o n t r o l l e r
does not retain
settings in a
power failure.

Controller will
not operate re-
ceiver.

Technical Service

(Do Not Send Products)

If you experience a problem, follow this guide. You may also want to visit our Web
site at: www.desatech.com. If the problem persists, call* for assistance at 1-800-
858-8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to:
DESA International, Inc.
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service Specialty Products
* If contacting Technical Service, please have the following information avail-
able: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

POSSIBLE CAUSE

1. Turn circuit breaker or fuse

on. Plug in power supply.

2. Turned switch on. Try an-

other power supply.

1. Install rechargable 9V bat-

tery. Replace defective 9V
rechargable battery.

1. Check dip switch settings

on receiver.

2. Verify correct group is se-

lected.

Summary of Contents for SL-6007








Reviews: