background image

Electric Bag Sealer 
with Cutter

Components _________________________ 2 
Safety Precautions ____________________ 2
Operating Instructions ________________ 3
Heating Adjustment Guide ____________ 3 
Maintenance _________________________ 4 
Parts Guide __________________________ 4 

Instruction Manual

Summary of Contents for HS28271

Page 1: ...______________________ 2 Safety Precautions_____________________ 2 Operating Instructions_________________ 3 Heating Adjustment Guide_____________ 3 Maintenance__________________________ 4 Parts Guide___________________________ 4 Instruction Manual ...

Page 2: ...ta Sheet MSDS for any reagent you use with this sealer 4 Never operate the sealer in a hazardous or flammable environment 5 To protect against risk of electrical shock do not put sealer in water or other liquid 6 Blade is extremely sharp Keep hands hair clothing and other utensils away from blade during operation to reduce risk of injury to persons and or sealer 7 Always work in a manner which nei...

Page 3: ...bar Press the handle down evenly 4 Heating is only applied while the light is on 5 When the light turns off either slide blade across to cut away excess material or lift handle to remove 6 Adjust the timer if needed INDICATOR POLYETHYLENE POLYPROPYLENE OR HIGH HEAT FILM 1 UNDER 0 06 mm 2 UNDER 0 1 mm 3 UNDER 0 14 mm 4 UNDER 0 2 mm UNDER 0 03 mm 5 UNDER 0 04 mm 6 UNDER 0 06 mm 7 UNDER 0 08 mm Heati...

Page 4: ... need to replace 4 The heating wire is held in place by two black plastic holders Remove the screw on end with the timer knob 5 Remove the wire on that end 6 Pull the wire toward the timer knob end of the unit 7 Place an extra screwdriver or pen in the opening behind the other back holder on the end with hinge This will keep that piece in place 8 Remove the screw and the rest of the wire 9 Replace...

Reviews: