42
Heatilator • ICON DV-IDV Series • 4042-575 Rev G • 09/07
Figure 12.14 Place Center of Screen Rod
Figure 12.15 Install Refractory Shields
Figure 12.16 Install Lower Decorative Front Face
K. Installing External Refractories
Open Refractory Package
(Figure 12.17)
• 1 - LH side refractory panel
• 1 - RH side refractory panel
• 1 - Front hearth refractory panel
Right
Left
Front Hearth
Notches indicate
top of refractory
Figure 12.17 Refractory Pieces
Install Side Refractories
• Locate right side refractory panel. See Figure 12.17.
• Install rod in hole in glass frame top. See Figure 12.18.
Insert Pin
Notch
Figure 12.18 Insert Pin into Top Frame
Insert Pin
Swedge
Figure 12.20 Insert Pin into Bottom Frame
I
• Install rod with swedge (Figure 12.19) in hole in glass
frame bottom. See Figure 12.20.
• Repeat for the left side refractory panel.
Swedge
Figure 12.19 Swedge
• Place the center of the screen rod into the center screen
rod support (see Figure 12.14).
• Install the left and right refractory shields using the three
screws (see Figure 12.15).
• Install lower decorative front face (see Figure 12.16).
