background image

Heatit Controls AB   l   Läkarvägen 4, 454 31 BRASTAD, SWEDEN 
Phone: +47 61 18 77 77    l   post@heatit.com – 

www.heatit.com

Heatit Controls AB can not be held liable for typographical errors, other errors or omittances in our information. 
Product specifications may change without further notice. All electrical installations must be carried out by a licensed 
electrician. The product must be installed in accordance with national building codes and our installers manual.

DISPOSAL GUIDELINES

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection 
facilities. Contact your local government for information regarding the collection systems 
available. If electrical appliances are disposed of in landfills or dumps, hazardous substances 
can leak into the groundwater and get into the food chain, damaging health and well-being.

ART. NO. PRODUCT

COLOR

FREQUENCY

45 126 73

Heatit ZM Thermostat 16A 

Grey  RAL 6015

EU 868.4MHz

PRODUCT INFO 

Heatit ZM Thermostat 16A

 

FEATURES

•  Z-Wave thermostat for in-wall installations
•  16A/3600W
•  NTC 10 sensor
•  SmartStart
•  Firmware update (OTA)
•  Power Metering
•  Supports encryption modes S0, S2 Authenticated Class,  

S2 Unauthenticated Class

This product is a security-enabled Z-Wave Plus product with
encryption. The product must be used with a security-enabled
Z-Wave Controller in order to fully utilize the product.

TECHNICAL DATA

Protocol 

Z-Wave

Chip 

Z-Wave 700 chip

Rated voltage 

230VAC  50Hz

Max load 

3600W  16A

Power Consumption 

<1W    

Ambient temperature 

5°C to 40°C (-30°C to 70°C storage)

Humidity 

Max 95% RH

Range RF 

Min. 40 meters 

IP Code 

IP 20

Size (DxWxH) 

46 x 45 x 25mm 

Approvals 

Z-Wave Plus V2, CE 

EN 60669-1:2018, EN 60669-2-1:2004 + A1:2009, EN 60669-1:2004/
A12:2010, EN 60669-2-5:2016, IEC 965-2-1, EN 62479:2010,  
ETSI EN 301 489-3 V2.1.1(2017-03), ETSI EN 300 220-2 V3.1.1 
(2017-02), RoHS 2002/95/EG, WEE 2002/96/EC 

MAINTENANCE

The device is maintenance-free. Indoor use only.

The product is also available in other Z-Wave frequency versions on request.

Summary of Contents for ZM 16A






Reviews: