Note: The Cozy Heat® Heating Element
is designed for in floor heating and space
heating applications only. Product labeling
may cross additional brands with same
specifications as Cozy Heat® SR Cable
Design and Installation
STEP 13 COMPLETE WARRANTY CERTIFICATE
Mail in the warranty certificate for Cozy Heat® and one for the ther-
mostat immediately after installing the Cozy Heat® system. Failure
to do so could void the manufacturer’s warranty. The warranty is
subject to the guarantee conditions listed on the warranty certificate,
and upon documentation that the required resistance readings were
completed. You may wish to keep a copy of the warranty card for
your reference.
The Cozy Heat® system is now ready to use and enjoy! Adjust the floor temperature sensing ther-
mostat until the floor reaches a comfortable level for floor warming applications. For space heating
applications adjust the thermostat to your comfort level, usually 65º to 70º F.
Keep these instructions and all other owner/operating manuals for future reference.
Note: The Cozy Heat® SR Heating Element
must be embedded in a cementitious material or
installed in conduit.
STEP 12 COMPLETE AND ATTACH LABELS
9
Place the included labels in the following locations:
Electrical Panel Label — Inside door at electrical service panel.
Stop Sign Warning Label — on or near the area to be floor warmed/in- floor
heated by Cozy Heat®
Note: Make certain to record information from the Product Identification Label, if
applicable.
STEP 11 TROUBLESHOOTING
Problem: Cozy Heat® Cable fails the Megohmmeter Test
Potential Causes:
Inspect the Cozy Heat® Cable for damage to the insulator or braided ground and/or contact
between the braided ground and the core wires. Repair the length of damaged Cozy Heat®
Cable with a splice kit or replace the entire length.
Call Heatizon Systems technical support 801-293-1232
Note: In the event the Cozy Heat
®
Cable has not been damaged in any way call Heatizon Systems
technical support @ 801-293-1232. For Warranty claims, please return the entire length of Cozy
Heat® to Heatizon Systems with requested forms (RMA, Warranty, Resistance Recording), with the
end termination and power termination connections intact, for evaluation prior to replacement.
