18
Resistance Recording Page
Use a Digital Multi Meter to measure continuity through the GutterMelt
®
SR Heating Element, and no
continuity between the heating element and the braided ground shield. GutterMelt
®
SR Cable should be
tested using a megohmmeter set at 2500 VDC at least twice. The measured value should not be less
than 20 Megohms. Record all test results below.
Prior to Installation (When
removed from Package)
After Installation of
GutteMelt® SR Heating
Element
M
Ω
@ 2500VDC
M
Ω
@2500VDC
Date Time
Date Time
Customer Warranty Information
MEASURE AND
RECORD
RESISTANCE
Name
Address
City
State
Phone
Zip
Purchased Product Details
Watts Volts
Ω
Watts &
Volts
Ohms
Sq. Ft.
Model
Size
Serial Number
(if applicable
)
Manufacture
Date
Summary of Contents for Gutter Melt SR
Page 2: ...2...
