48
Watlow Flame Sensor Temperature Probe
Principles
The temperature probe is how the Watlow Flame Sensor reads the temperature of the fire.
Removal and Replacement
1) Turn off the main power supply to the HEATMOR™.
2) Remove the 6 screws from the inside front
panel that hold the Electronics.
3) Pull the panel away from the housing to obtain
clearance to disconnect the temperature probe
from the Watlow flame sensor control.
4) Unscrew the temperature probe out of Flue
Cover A and disconnect from the electronic
controller.
5) Install the new temperature probe wires into the
electronic controller and screw the new probe into Flue Cover A.
6) Replace the Electronics panel.
Dayton Auger Speed Control
Principles
The Dayton Auger Speed Control regulates the speed that the auger feeds pellets into the firepot.
Manufacturer suggested setting is 80+/-5.
1) Below its optimum
setting it will not feed enough pellets into the firepot to keep up to the heatload.
2) Above its optimum setting it will feed too many pellets into the firepot and it will decrease your
system efficiency.
3) At its optimum setting it will keep up to the heatload and also not have any unburnt pellets in the
ashpan.
Operation
The factory setting on this Dayton Auger Speed Control is 80. See “Loading Wood Pellets into the
HEATMOR™”
.
Removal and Replacement
1) Turn off the main power supply to the HEATMOR™.
2) Remove the 6 screws from the inside front panel that hold
the Electronics.
3) Pull the panel away from the housing to obtain clearance to
work on the Dayton Auger Speed Control from the back.
4) Disconnect and label or draw a diagram of each wire
connection on the Dayton Auger Speed Control.
5) Replace the Speed Control and reverse the steps above
for re-installation.
Watlow Flame Sensor Control
Dayton Auger Speed Control
Summary of Contents for 200 SSP
