USER MANUAL:
How to use
heater controller
(optional remote controller)
VIDEO available at
www
.homeplus-system.com
Connect heater controller to the heater
Use manufacturer recommendation
Turn ON the controller
ON/OFF
Heater controller
–
+
Heater
controller
display
LED (Activity)
Heater controller
Remote controller
LED activity: heating element is working
1x
1x
3
sec
During countdown
within 30 seconds
Reverse remote controller.
Push pairing button!
Pairing fi nished!
Remote controller
is already working
Allen key
included
Hold 3 sec.
Start countdown
Press once
upper and lower
button together
Prepare remote cont allen key for use
Remote controller
Pairing button
for allen key (F)
Back
Magnet clip
Wall clip mounting
Push for pairing button using
allen key to activate the controller
Due to proper
temperature reading
do not place
a remote controller
(temperature sensor)
over radiators,
next to doors
or in sunny places.
Locate suitable place to mount the remote
START: Heater controller and remote controller pairing
If you bought a remote controller together with H+heater
you do not need to pair it!
1
USER MANUAL:
How to use
heater controller
(optional remote controller)
VIDEO available at
www
.homeplus-system.com
Connect heater controller to the heater
Use manufacturer recommendation
Turn ON the controller
ON/OFF
Heater controller
–
+
Heater
controller
display
LED (Activity)
Heater controller
Remote controller
LED activity: heating element is working
1x
1x
3
sec
During countdown
within 30 seconds
Reverse remote controller.
Push pairing button!
Pairing fi nished!
Remote controller
is already working
Allen key
included
Hold 3 sec.
Start countdown
Press once
upper and lower
button together
Prepare remote cont allen key for use
Remote controller
Pairing button
for allen key (F)
Back
Magnet clip
Wall clip mounting
Push for pairing button using
allen key to activate the controller
Due to proper
temperature reading
do not place
a remote controller
(temperature sensor)
over radiators,
next to doors
or in sunny places.
Locate suitable place to mount the remote
START: Heater controller and remote controller pairing
If you bought a remote controller together with H+heater
you do not need to pair it!
1
Hard wire connection
Finishing
Electric radiators
CH system
5
3-5 cm
6A
7
S22
S22
6B
For the heater perma-
nently connected (hard
wire) there must be
applied a cut-off device
from the mains. Such
a device must discon-
nect the heater from the
supply mains in 2 poles,
with contact separation
of at least 3 mm
9B
230 V
Connection with a coiled cable and a plug
4
230 V
CAUTION! Do not disconnect
heater controller when the system
is powered.
Live
Earth
Neutral
ON/OFF
Switch
9A
230 V
After electric connection,
TURN ON the switch
(concern only hard wire connection)
10
ON/OFF
Switch
3
Recommendation:
Plug and turn
front of the heater
controller
to vertical position
90°
[ 6 ]
