background image

    SAFETY:

1. 

The heater should be installed by a qualified person.

2. Bathroom radiators fitted with electric heaters should be fixed not less than 60 cm from

a bath, shower or wash basin, and never above abath.

3. For the heater permanently connected (hard wire) there must be applied a cut-off device 

from the mains. Such a device must disconnect the heater from the supply mains in 

2 poles, with contact separation of at least 3 mm.

4. This appliance can be used by children aged from 8 years and above and persons with 

reduced physical, sensory or mental capabilities or lack of experience and knowledge if 

they have been given supervision or instruction concerning use of the appliance in a safe 

way and understand the hazards involved

5. Children shall not play with the appliance. Cleaning and user maintenance shall not be

made by children without supervision.

6. 

The heater MUST BE DISCONNECTED before cleaning the casing. 

AVOID SOAKING THE CASING.

7. One radiator valve must always be open when a heater is in use (liquid thermal expansion).

CAUTION:

 To avoid the risk of fire or electric shock the heater should be protected from water spray or flooding. This 

appliance is not intended for use by persons (including children) of limited physical, sensory or mental abilities, or per-

sons inexperienced or not familiar with the appliance, unless supervised or instructed on the appliance use by persons 

responsible for their safety. Particular attention should be paid  to children, to preclude playing with the appliance by them. 

Exclamation mark on triangular field signals:      

information important for the user

.

CAUTION:

 

electric shock hazard!

, lightning mark ended with arrow on triangular field      

CAUTION:

 in order to reduce electric shock hazard, do not remove the casing (nor its rear cover). There are no user-

serviceable parts inside the appliance; the product must be returned to the manufacturer for repair via the distributor who 

sold the product.

GUARANTEE TERMS:

Guarantee is granted by manufacturer for 24 months period star ting from date of sale, but no longer than 36 months from 

date of the heater manufacture. Defects revealed within this period, resulting from a fault of manufacturer will be repaired 

free of charge or the item replaced with new, equivalent one. Term of complaints’ investigation up  to 14 (fourteen) days 

from date of submission to the manufacturer.

Guarantee does not cover:

1. Using of product in a manner noncompliant with attached instructions.

2. Any visible damage to the heating element or controller due to improper use. Damaging of manufacturer’s seals makes 

    the guarantee null and void.

In the event that Heatpol are unable to repair or replace this product we reserve the right to refund the purchase price 

as an alternative

.

GUARANTEE CARD

 

Serial No.:

      

Date of sale: 

    

                                                                                  

Stamp of retail outlet, signature of seller

Caution: 

The guarantee card should be legibly filled in retail outlet. Any corrections on the guarantee card will invalidate 

the guarantee. Guarantee card valid only with proof of purchase.

Mników 322, 32-084 Morawica, Poland 

Tel/fax: +48 12 656 44 91

www.homeplus-system.com

[ 3 ]

Kit content

USER MANUAL: 

Heating e Heater controller (vertical) H+

1

Heating 

element

Heater 

controller

O/D shaped

color cover

Allen  

key

Wall mount

plastic cover

+

_

System option:

Temperature sensor

Preparing the temperature sensor

Locate suitable place to mount temperature sensor

2

3

Pairing button

for allen key (F)

Back

Magnet clip

Wall clip mounting

To activate temperature sensor 

for the first time, press the pairing button

LED (Activity)

Do not place the temperature sensor:

– over the radiators

– next to doors

– in sunny places

Summary of Contents for Home +









Reviews: