WARMER-
DECREASE FLOW - TURN KNOB CLOCKWISE
COOLER-
INCREASE FLOW - TURN KNOB ANTI-CLOCKWISE
Make adjustments carefully. Give the shower a few seconds after each adjustment to stabilise, then check the
temperature by hand before stepping into the shower. The 'low' setting cuts out one heating element and so can be
used to save energy in the summer months when incoming water temperatures are higher, or simply to reduce the
spray temperature.
A cold shower can be obtained by leaving the isolating switch off.
6.2 To turn off:
(a) Turn water control knob fully clockwise.
(b) Turn off your isolating switch.
Environmental Information
This product is made from many recyclable materials, therefore at the end of its useful life it should be disposed of at
a local authority waste disposal site to ensure the environmental benefits are realised.
Handsets
It is recommended that periodically the handset is immersed and soaked in a proprietary descalant
overnight.
Page 17
6.3 Maintenance
(a) Cleaning the Handset:
To get the best performance from your shower, the plate in the handset must be cleaned regularly, maybe as often as
once a week in hard water areas.
This is because the fine outlet holes can become restricted with scale, and this will affect the pattern of the spray and
cause the heater to perform poorly.
For details of the cleaning procedure please refer to the instructions in the accessories box.
(b) Inspection:
We recommend that in the interests of safety the shower and its electrical installation is checked by a qualified
electrician at least every two years.
Page 18
Notes
Page 19
21/03/2011
www.partsarena.co.uk/baxi/System/DA…
partsarena.co.uk/baxi/…/I47-2835.htm
16/16