17
Installation & Owner's Manual
5. OPERATION(Model: TDF190/300)
5.1 Control Panel Explanation
5.2 Display Explanation
Fig.5-1
Display
Operation
Fig.5-2
14.1 14.2
1
2
3
4
5
6
ON
OFF
ON
OFF
ON
OFF
ON
OFF
SET
DAY
Invalid
SET CLOCK
ON
OFF
ON
OFF
VACATION
CANCEL
CLOCK
TIMER
ENTER
Press 3 seconds
for lock/unlock
DISINFECT
1
2
3
4
5
6
ON
OFF
ON
OFF
ON
OFF
ON
OFF
SET
DAY
Invalid
SET CLOCK
ON
OFF
ON
OFF
ON/OFF
No
Icon
Description
Table 5-1
Wire controller:
If connected a wire controller, will be
lightened; otherwise be extinguished.
Outside solar heat source:
If an outside solar heat source has been
connected to the unit, will flash with 0.5 Hz
frequency; otherwise will be extinguished.
Vacation mode:
will be lightened if the unit is under vacation
mode, otherwise will be extinguished;
will flash with 2Hz frequency when setting
vacation mode.
Compressor:
will be lightened when compressor is
running, otherwise will be extinguished
No
Icon
Description
E-heater:
will be lightened if e-heater is activated,
otherwise will be extinguished.
If e-heater is automatically activated by unit,
will be lightened;
If e-heater is manually activated, will flash
with 0.5 Hz frequency.
When setting e-heater manually ON/OFF,
will flash with 2 Hz frequency.
Disinfect:
will be lightened when the unit is under
disinfect mode, otherwise will be extinguished.
will be lightened if disinfect mode is automati-
cally activated by unit;
will flash with 0.5 Hz frequency, if disinfect
mode is manually activated;
will flash with 2Hz frequency when setting
disinfect mode or setting disinfect timer.
High temp. Alarm
If setting water temp. is higher than 50
will be lightened, otherwise will be
extinguished.
Alarm:
When unit is under protection/error, will flash
with 5Hz frequency as well as buzzer will sound
3 times every 1 minute until protection/error
eliminated or press for 1 second.
Lock:
If button is locked, will be lightened,
otherwise will be extinguished.
Temperature unit
If setting temperature unit as celsius, will be
lightened, will show celsius degree;
If setting temperature unit as Fahrenheit, will
be lightened, will show Fahrenheit degree.
If button is under lock mode, press any button
except unlock button, will be lightened;
will be lightened if screen is unlocked.
It shows water temperature on normal mode;
It shows remaining vacation days on vacation
mode;
It shows setting temperature under setting
mode;
It shows unit setting/running parameters,
error/protection code under query mode.
will be lightened when setting water
temperature or setting days for vacation.
will be lightened when setting days for
vacation;
will be lightened when under vacation mode.
Water Temperature setting
Date setting
14.1
14.2
Invalid
Invalid
Invalid
:
Reserved
ENGLISH
