5
Make sure to insert the cable within the plastic staples.
1: Remove the butterfly nuts from the base.
2: Pull out the power cord through the base and place it through the cable channel to
ensure that it is secure.
3: Ensure that the base plate is place in the correct position with the heater base. Gently
screw the butterfly nuts into position and secure firmly.
•
Connect the power cable to the socket. (Note: make sure the voltage which is indicated
on the appliance matches the local voltage before connecting the appliance. 220-
240V~50/60Hz
•
Make sure to place the appliance on a flat, dry and stable surface. This appliance is only
suitable for indoor and for domestic use.
Using the Carbon fibre heater:
•
The Carbon fibre heater includes two heating modes: 450W and 900W.
•
Select the desired heating power by turning the knob towards the left.
•
If you wish to use the oscillation function, turn the knob towards the right side selecting
the desired heating level. The oscillation range is set to 70º on the two sides.
•
To off the carbon heater, simply turn the knob to any of the two “Off” positions.
•
Never block the oscillation movement.
