Assembly
b. Kmh (kilometers per hour) will flash on the screen. To change to miles per hour,
press the front button and mph will be displayed. Press the gray button on the
back.
c. 26” will be flashing. This is to adjust the tire size. Since the bike has 26” tires,
accept this reading by pressing the gray button on the back.
d. Press the front button three (3) times until time is displayed. Press the gray
button on the back and the hour will blink. Press the front button until the correct
hour appears.
e. Press the gray button on the back and minutes will blink. Press the front button
until the correct minutes are displayed. Press the gray button on the back and
the time is set.
f. Put the computer back on the bike.
Note: The computer always displays speed, and can display time of day, maximum
speed, trip distance, and odometer in the lower display. Use the front button to toggle
between these settings. To reset maximum speed and trip distance, press and hold
the front button to zero these out. Odometer can be reset only by pressing the front
and back buttons.
12