Heckler Design WindFall H604, Assembly & Installation

Selecting Your Mounting Screw 

Positions

ADA Compliance Guideline

Creating The Ethernet Cable Hole

Installation Instructions and Template

Important Note:

Note: Drawing is not to scale.

3

To accommodate various mullion styles, 

multiple screw hole positions are available. 

Please select the mounting positions that 

work best for your mullion.

You may use any screw you see fit for 

mounting the product to the mullion.

If you choose to use the self-tapping 

mounting screws provided, we recommend 

drilling a pilot hole with a #17 drill bit or a 

5/32-inch drill bit.

If your Ethernet cable has an RJ45 connec-

tor installed, drill a 5/8 inch hole in the 

position shown.

If you will install an RJ45 connector after the 

Ethernet cable is drawn through the mullion, 

a smaller hole can be created.

For ADA compliance, the center of the 

Ethernet cable hole should be no higher than 

45 inches above the ground.

A minimum 1.5 inch (38mm) set back from 

mullion face to the glass is required for an 

optimal installation in which the front face of 

the enclosure is flush with the front face of 

the mullion.

WindFall Side Mount for iPad

Mullion Door Frame

Glass

Mullion Door Frame

Glass

BEFORE

INSTALLATION

AFTER

INSTALLATION

1 inch

(55 mm)

0.75 inch

(19 mm)

2.5 inch

(63.5 mm)

1.25 inch

(31.8 mm)

7.91 inch

(201 mm)

1.25 inch

(31.8 mm)

The top of the screen.

Ground

45 inch

48 inch