background image

•  Before changing a safey glass or a Pyrex® cover - always disconnect the Hedler light unit from the power 

supply and let cool down the light unit completely.

•  Before changing a bulb and/or fuse  - always disconnect the Hedler light unit from the power supply and let 

cool down the light unit completely.

•  For replacing a safety glass or Pyrex® cover - use the intended original Hedler spare parts only.
•  For replacing a bulb and/or fuse(s) - use the intended original Hedler spare parts only.
•  Never use a „repaired“ fuse.
•  Changing/replacing a flash bulb of a Hedler light unit is not allowed to be done by a customer. Changing/repla-

cing of a flash bulb has to be done by Hedler Systemlicht GmbH only.

Additional safety instructions and explanation for symbols

•  Hedler light units produce a very intensive and bright beam of light: never look directly into the bulb and/or 

flash bulb. while it is in operation. Never light or flash directly into the eye(s) of a human or an animal, this can 
cause permanent damage to the eye(s) or health threat(s) (like sunburn).

•  Please note, dazzle / glare caused by continuous light unit(s) or flash light unit(s) can cause an immediate (part-

ly and/or temporarily) loss of vision - this can lead to accident(s) (traffic, stairs, and so forth).

•  Before (inter-)changing accessories, light modifier(s) or bulb(s) - switch off the light unit(s) and let it cool 

down completely.

•  Some Hedler light units and/or Hedler reflectors, parts of softboxes and reflex umbrellas and some accesso-

ries can heat up extremely while in operation: there is a serious risk of burning. Never touch these parts while 
they are in operation. (Please, use heatresistant and heatprotecting gloves to avoid burning!).

•  Please let cool down Hedler light units and/or Hedler reflectors, parts of softboxes and reflex umbrellas and 

some accessories completely after using them and before packing them away: not doing so can cause serious 
burnig and/or the risk of sparking.

•  Not used as intended and/or in the case of inappropriate use of Hedler light units and/or Hedler reflectors, 

parts of softboxes and reflex umbrellas and accessories there is the serious risk of a (deadly) electrical shock.

•  Hedler light units, Hedler reflectors, softboxes, reflex umbrellas and/or Hedler accessories are no toys, they 

are unsuitable for use by children. Always keep Hedler light units, Hedler reflectors, softboxes, reflex umbrel-
las and/or Hedler accessories out of the reach of children.

Explanation for symbols:

Minimum               Heat            Volt /           Watt /        Min. load      Warning          CE                   Bin
distance               °C / °F          Voltage       Demand       capacity        Voltage                                WEEE

Maintenance

For a secure operation of light units they have to be maintained. Therefore: before using light units they have to 
be checked visually and an electrical safety check has to be done every twelve month. The results of this check 
have to be documented and archived.

Liability limitation

For all injuiries and/or damages to people and/or objects, which are caused by using Hedler products in a way that 
the are not intended for the user is liable - not the manufacturer.

If you do have a question to set up and/or to operate Hedler light units, Hedler reflectors, softboxes, reflex 
umbrellas and/or Hedler accessory, please ask at Hedler Systemlicht GmbH directly or at the Hedler authorized 
photographic specialised dealer (a list with this dealers you will find on our website www.hedler.com).

H E D L E R   S y s t e m l i c h t   G m b H       H e e r s t r a s s e   1 1 2       D - 6 5 5 9 4   R u n k e l   /   L a h n       w w w . h e d l e r. c o m
Te l e f o n   +   4 9   -   ( 0 )   6 4 8 2   9 1 8   1 0 0       Te l e f a x   +   4 9   -   ( 0 )   6 4 8 2   9 1 8   1 1 1       e M a i l   i n f o @ h e d l e r. c o m

Safety instructions

HEDLER

®

S y s t e m l i c h t

V W

1m

min.  kg

Summary of Contents for Profilux LED 1400








Reviews: