715098 rev 1
5
EN
3. Product description
The IRT UV SmartCure is a hand-held appliance, battery-
operated and equipped with high power LED module
emitting UV and visible light. IRT UV SmartCure is
available in 395 nm wavelength, refering to the peak
value.
Use products/UV paint systems developed for UV curing.
Check with your paint supplier which wavelength to use.
3.2 Display
1. Trigger switch
2. Display
3. Lithium-ion battery
4. Release push-button for battery
5. Dust filter
6. Cover dust filter
This document is the property of Hedson Technologies and may not be copied without our written permission.The contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
Denna ritning är Hedson Technologies egendom. Den får icke vare sig i ursprungligt eller ändrat skick utan vårt medgivande kopieras eller mångfaldigas,förevisas för eller på annat sätt delgivas eller utlämnas till tredje person. Överträdelse här av beivras med stöd av gällande lag
E
Rev. by Appr. by
Change no
Appr. date
Change description
Rev.
2
5, 6
4
1
3
4. Operation
Before every usage, check that:
• Glass is clean and free from over spray which
decreases the intensity.
• Fan is running during operation.
• UV LED light up.
Hold IRT UV SmartCure approx. 100 mm/4 inches from
object to be cured. Time depends on area and material
to be cured, see paint manufacturers data sheet.
For larger areas, use sweeping motion similar when
using a spray gun.
Change battery,
symbol is flashing when
0%.
Fan is running,
symbol is flashing.
Battery level
Curing time in minutes
and seconds.
High temperature,
symbol is flashing.
Service symbol with code,
symbol is flashing.
3.1 Overview
