TRANSPORT AND SHIPMENT
If you are packing the amplifier for shipping, please follow these instructions to avoid damaging the unit:
Be careful not to hold the volume- and source-knobs when lifting the amplifier.
Put the plastic bag around the amplifier. Make sure that the plastic bag does not press tightly on the knobs
as this may damage them during transportation.
Place the two bottom shock absorbers into the original cardboard box, one in each end of the box.
Place the amplifier into the cardboard box, fitting the shock absorbers. Place the top shock absorbers on
top of the amplifier.
Make sure the plastic bag is still loose around the volume and source knobs to avoid any damage to the
knobs during transport. Close the cardboard box using a suitable tape.
CLEANING
Fingerprints or stains on the front panel or top cover can be removed with a cloth moistened with warm
water or a mild detergent suitable for cleaning mirrors and windows.
TECHNICAL SPECIFICATIONS
H300 Integrated Amplifier
Power output
250W + 250W in 8 Ohms, Dual mono
Minimum load
2 ohms
Analog Inputs
1*balanced (XLR), 3*unbalanced (RCA), 1*Home Theatre (RCA)
Digital Inputs
2*coaxial S/PDIF, 2*optical S/PDIF, 1*USB.
Line level Output
Unbalanced Pre Out (RCA)
Digital Output
Coaxial S/PDIF out (digital inputs only)
Other Connections Direct IR in - 3,5mm jack, max 12V
Frequency response 5Hz-180kHz
Signal-to-noise ratio More than 100dB
Crosstalk
Less than -100dB
Distortion
Less than 0.01% @ 100W 8 Ohms 1kHz
Intermodulation
Less than 0.01% (19kHz + 20kHz)
Damping factor
More than 1000 ( main power output stage )
Dimensions
12cm x 43cm x 38cm (HxWxD), 25kg shipment weight.
