Display On/Off
The DISP button on the RC10 remote
control may be used to turn the display of
the H95 on or off. Hold the DISP button for
more than 1 second to turn the display off.
Press the button again to turn the display
on.
Home Theater or Standard Analog Input
All inputs can be changed into a Home
Theater input. This will set the Volume at a
fixed high volume level. Enter the device
menu and navigate to “HT”. Press Play
to select this submenu. Now navigate to the
input(s) you want to change. Press Play to
toggle between a fixed level input or normal
variable input. Exit the menu by navigating
to “Exit” and pressing Play, or by turning one
of the knobs on the H95. Your changes have
now been stored and will take effect the
next time you select the changed input(s).
WARNING: Activating Home Theater sets
the volume at a high fixed level. This may
harm your speakers if a fixed level input is
connected.
Sleep / Auto Standby
The H95 will automatically switch itself off
after 15 minutes without music, or with very
low signal on the speaker outputs.
You can disable this feature in the device
menu. Navigate to “Sleep” to change the
settings. For details, please visit support.
hegel.com
Using the USB Connection:
When you connect H95 to a computer with
a USB cable (not included), the H95 will
automatically install itself as a USB sound-
card on all newer versions of Windows and
MAC OS X, and most newer versions of
Linux.
When your computer is connected with
a USB-cable you may use the supplied
remote control to skip/play/pause in most
media players.
NOTE:
Before connecting a computer to the H95
for the first time: Make sure the computer
is connected to the internet and close all
media players, such as iTunes, Spotify or
Windows Media Player.
Troubleshooting with MAC:
H95 is connected but there is no sound
coming from the speakers: Go to System
Preferences – Sound – Output and select
“TE7022 Audio w/ SPDIF” as the Output
Device.
Special Functions
17
