18
Technical Specifications
H95 Integrated Amplifier
Power output
2*60W in 8 Ohms
Minimum load
2 Ohms
Analog Inputs
2*Unbalanced (RCA),
Digital Inputs
1*Coaxial S/PDIF,
3*Optical S/PDIF,
1*USB,
1*Network
Line level Output
1*Unbalanced Variable(RCA)
Frequency response
5Hz-100kHz
Signal-to-noise ratio
More than 100dB
Crosstalk
Less than -100dB
Distortion
Less than 0.01% @
25W 8 Ohms 1kHz
Intermodulation
Less than 0.01%
(19kHz + 20kHz)
Damping factor
More than 2000
(main power output stage)
Dimensions including feet, terminals and controls:
10cm x 43cm x 35cm
(HxWxD)
10,6kg shipment weight.
3.94” x 16.93” x 13.78”
(HxWxD)
23.36lbs shipment weight.
Transport and Shipment
If you are packing the amplifier for shipping,
please follow these instructions to avoid
damaging the unit: Be careful not to hold the
volume- and source-knobs when lifting the
amplifier. Put the bag around the amplifier.
Place the amplifier into the shock
absorbers. Place the top shock absorber on
top of the amplifier.
Use and Placement
The Hegel H95 should be placed on a flat,
hard surface for proper cooling. The amplifier
performs best after being switched on for
about 1 hour for heating up. A certain space
is required for air circulation above and
below the amplifier. The amplifier must never
be placed on a carpet or similar surface that
obstructs air circulation through the unit. Nor
must it be covered while in use or placed on
a narrow shelf or in another confined space.
The amplifier will automatically switch itself
off if overheated. When it cools down the
relays kick in and the amplifier sets the
volume to 0.
Cleaning
Fingerprints or stains on the front panel or
top cover can be removed with a cloth moist-
ened with warm water or a mild detergent
suitable for cleaning mirrors and windows.
General Information
