Working with the Nexscan F 4100/F 4200
Nexscan F 4100/F 4200 – Operation
4–9
ABC
Selecting the Quality
For Newcolor: The autofocus function is active for
all quality modes, i.e. for
good, very good
and
excellent
.
For Linocolor: Select either
excellent
or
excellent
x4
so that the autofocus function is activated.
If objects have reflecting surfaces, blooming with
colored edges may occur which should be
retouched.
Mounting with Oil, Film Cleaner or Gel
Attention: Mounting originals with liquids such as
oil, gel or film cleaner must only be carried out
outside the device on the universal tray.
If the originals are damaged or if they are of poor
quality, use a Film cleaner or gel. This makes
scratches, film damage and other flaws invisible.
We especially recommend the use of Film cleaner
as time-consuming cleaning of the originals after
scanning is no longer necessary.
Mounting takes place in the following order:
Film cleaner/gel/oil – original – film cleaner/gel/
oil – foil.
1
