Working with the Nexscan F 4100/F 4200
4–26
Edition September 2000
ABC
0
During the name allocation, Newcolor allocates
ascending numbers to the slides, e.g.
Image01... Image35. However, you can also
individually change the name, e.g. for a certain
customer. This should be done before
scanning. If the count for a certain name does
not start at 01, a frame of this name and
number already exists. This can also be in a
different mounting mode, e.g. not in
Slide tray
but in
Direct
.
More information about name allocation can
be found in the LinoColor documentation.
0
Perform an overview scan (transparent). Image
frames are created and it is automatically
detected whether the slides have been inserted
in landscape or portrait format.
0
You can now select the frames from which you
want to create low-resolution or high-
resolution scans. If you are performing low-
resolution scans, you may be able to perform
further settings for the subsequent high-
resolution scans. Then perform the high-
resolution scans.
0
Another possibility is to process the jobs by
means of
JobAssistant
. In this case, you will
perform an overview scan and enter all
standard settings for the jobs. You will then
select the jobs (with Ctrl + a) and plan them as
low-resolution scans (if you want to perform
further settings) or directly as high-resolution
scans. The additional procedures are described
in the Newcolor documentation.
Name Assignment
Job Assistant
