Basic operation | Using the Inspector
Function element
Short description
Continuous output of measured values
Send measured values to computer; tapping activates
the automatic output of measured values according to
the configuration; the data is transferred continuously at
intervals of approx. 200 ms
Edge probing (probing)
Tap to start the wizard for probing a measured object
Determining the center line (probing)
Tap to start the wizard for probing a measured object
Determining the circle center (probing)
Tap to start the wizard for probing a measured object
dial gage
Display of nominal values, warning thresholds, and
tolerance limits via a dial gage; tapping opens the views of
the
dial gage
function
"Configure the Dial gage function",
Relative
Tapping activates
Relative measurement
; the zeroing of
axes or the overwriting of a position value has no effect on
the selected preset when the
Relative
function is activated
"Performing a relative measurement",
D/R
Display of position values of radial axes; tapping switches
from radius to diameter; the product displays the doubled
position value
Mastering
Saving of measured values of a reference part as master or
adopting position values of the position display as master;
corresponding axes can be selected
"Configure the Mastering function",
6
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
69
Summary of Contents for GAGE-CHEK 2000 Series
