25
Step 3:
Press the Doorbell Button once to start pairing.
Step 4:
You will hear two time of “Ding-dong” from the chime, and the Working Indicator will
flash blue quickly, then turns off, which indicates a successful pairing.
Tips:
•
The Pairing Indicator Will be Off if there is no doorbell paired within 30s; press
the Reset button on the chime once to be ready for pairing again.
•
Press the Ringtone button to select a tone for your chime.
•
Press the Volume ± button on the chime once to adjust the volume levels of the
ring.
•
To unpair the chime with the doorbell, please press and hold the Reset button on
the chime for 5s to reset it. The pairing indicator will flash red for three times,
then it will be ready for pairing again.
Flashes blue quickly, then turns off
