29
Step 1:
Connect the U-shape terminals of the
Copper wires with a U-shape Terminal to
the Screw Terminals of the bracket.
Step 2:
Connect and twist wires together as
instructed in the picture.
Step 3:
Use the wire nuts to make sure the strong
connections.
Step 4:
Fix the bracket onto the wall, insert the
doorbell into it, then tighten them
together.
Notes:
•
The Voltage of the wires should be 12-24 V.
•
If you’ve installed a doorbell before, please use the Copper Wires with 2 U-shape
Terminals to connect Greets 1 with your old doorbells Screw Terminals. Please
contact us at support@heimvision.com if you need further assistance.
