8
Step 4:
Gently press and hold the Power Button for 3s to turn on the monitor, then you can see
the live view.
Notes:
ICONS EXPLANATION
You will see the interface below after the monitor is turned on.
Status Bar Icons
No signal connection
Signal strength
The camera has been paired with the monitor already, just plug and use.
If it shows after turning on the monitor, this is likely due to the far distance between the monitor
and camera, the unsuccessful factory pairing, or the camera disconnected to power. Please move
the monitor closer to the camera, manually pair the monitor with the camera following the section
on page 11, or connect the camera to power accordingly.
Please turn off the screen to save battery power when you don’t need to watch live video. If the
Sound Detection is enabled, the screen will turn off in 15s without any operation.
