background image

TWO YEARS LIMITED WARRANTY

For a period of two (2) years from date of purchase, SFA Companies will repair or replace, at its option, without charge, 

any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is 

a consumer's exclusive remedy.

Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, 

to SFA Companies

 

Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.

Except where such limitations and exclusions are specifically prohibited by applicable law:

(1) THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE 

PRODUCTS AS DESCRIBED ABOVE

(2)

 

SFA COMPANIES SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS  

WHATSOEVER. 

(3)  ANY  IMPLIED  WARRANTIES,  INCLUDING  WITHOUT  LIMITATION  THE  IMPLIED  WARRANTIES  OF 

MERCHANTABILITY AND  FITNESS  FOR A  PARTICULAR  PURPOSE,  SHALL  BE  LIMITED TO TWO YEARS,  

OTHERWISE  THE REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED 

WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER 

WARRANTIES, EXPRESS OR IMPLIED.

(4) ANY MODIFICATION, ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS 

THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.  

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or 

exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which 

vary from state to state.

SFA Companies

10939  N. Pomona Ave. Kansas City,  MO 64153

816-891-6390

customerservices@heinwerner-automotive.com

14

Summary of Contents for HW93659















Reviews: