9/52
MED 113539 2017-12-15
MED 113539 2017-12-15
When the battery reaches a critical charge state, the LED will light up orange. The device must now be
recharged.
Apart from the charge indicator LED, the charging status can also be seen in the settings via the submenu
”iC2 Connection“. In addition, the charge status is indicated by a bar graph display in the picture capture
mode.
Charge the device outside of the patient environment (1.5 m).
Hygienic reprocessing
The instruction is available:
- online at www.heine.com
- in a paper version which you can request from the address listed
Maintenance
The device is maintenance free.
Service
The device has no components serviceable by the end-user.
General notes
The warranty for the entire product is invalidated if non-genuine HEINE products or non-original parts
are used and if repairs or modifications are made to the device by persons not authorized by HEINE.
For more information, please visit www.heine.com.
The expected life cycle, when the device is normal used and the warning and safety information as well
as the maintenance instructions are observed, is up to 5 years.
Beyond this period, the product may continue to be used if it is in a safe and good condition.
General warnings
Use only CE marked USB power supplies (5 V) from reputable manufacturers that conform with the
safety requirements from the IEC 60950-1 Information technology or IEC 60601-1 Medical electrical
equipment.
Check the correct operation of the device before use! Do not use the device if there are visible signs of
damage or the light begins to flash.
Do not use the device in fire or explosive risk area (e.g. oxygen saturated or anaesthetic environments).
This product is not allowed to enter or be used in areas with strong magnetic fields e.g. MRI scanners.
Do not modify the device.
Use only original HEINE parts, spare parts, accessories and power sources.
Repairs shall only be carried out by qualified persons.
Store and use the device in dry and dust-free environments only!
