Translation of the original instructions / Cattle clipper Xperience
15
X
Oil the blades prior to, during and after every use.
X
Oil the blades no later than when the blades leave streaks or slow down.
X
Apply several drops of oil on the front and on the sides of the clipping
blades (see Fig. 10).
X
Wipe excess oil off with a soft, dry cloth.
X
Lubrication sprays do not have sufficient oil for a good lubrication, but
serve for cooling the shearing blades.
X
Immediately replace damaged or notched blades in order to avoid
injuries.
6.7 Cleaning
CAUTION!
IMPROPER CLEANING.
RISK OF DAMAGING THE SHEARING MACHINE!
X
Clean the shearing machine only with a dry cloth and with the
brush supplied. To clean the air filter, use exclusively a dry
brush or a nailbrush.
X
Never use compressed air for cleaning the clipper.
Housing of the shearing machine
X
Clean the housing of the shearing machine with a dry cloth.
Shearing blade and shearing head
X
Use the brush supplied to clean the clipping blade and the clipper head.
X
Lubricate the clipping blades as described in chapter 6.6.
Air filter
Fig. 11
X
Remove the air filter from the clipper.
X
Clean the air filter with a dry brush
or a nailbrush. Make sure no foreign
objects get into the device while
cleaning it.
X
Slide the air filter back onto the
clipper.
CAUTION!
POSSIBLE DAMAGE TO THE SHEARING MACHINE!
Operating the shearing machine without the air filter can damage
the shearing machine.
X
Only use the shearing machine with a properly fitted air filter.
Summary of Contents for Xperience/C
