715-850W, 220-240V, ~ 50/60Hz
4
V.
USING INSTRUCTIONS
1. Put bread slice into the bread slot, it can be inserted two slices at most every time.
Only the regular slice can be placed into the bread slot.
Note: Make sure the crumb tray is completely positioned in place before using.
2. Connect the power cord to the outlet .
3. Set the color control to get the desired color of slices of bread.
There is 7-position
level, the lowest is white and the highest is puce. The bread slice can be toasted to
golden color at the position of “4”.
Note: 1) Toasting color for one side is darker than that for double bread at the same
level.
2) If toasted continuously, toasting color for the latter bread is darker than the
color of previous cycle at the same level.
4. Press carriage handle down vertically until it is positioned in place, the indicator of
Cancel will be illuminated, and toasting begins. Once the bread has been toasted to
the preset color, the carriage handle will be automatically sprung up, and you can
remove the bread readily.
Note: The carriage handle can only be latched when the appliance connects to the
power supply.
5. During roasting , frying is apparent color . If satisfactory color slices of bread, you
can interrupt roasting process by clicking " Cancel" at any time.
6. If the bread has been removed from the refrigerator , set the color to the desired
color control . Press down on the vertical drive until it is fixed , then press the "
Defrost " and defrost indicator will light. In this way it will be fried with the desired
color .
7. If you want to reheat cold toast , press the drive down vertically until it is fixed . As
soon as you press the button and reheating , they will illuminate . At this point how
roasting slices of bread is fixed . Action button will automatically raise and reheating
process will end.
