11
3. Unscrew the special flange self-tapping screws which are used for fixing the right upper
hinge part by a 8mm socket driver or a spanner (please support the upper door with your
hand when doing it).
4. Remove the upper hinge axis, transfer it to reversed side and tighten securely, then put it in
a safe place.
5. Remove the upper door from the middle hinge by carefully lifting the door straight up.
Note: When removing the door, watch for washer(s) between the center hinge and the
bottom of the freezer door that may stick to the door. Do not lose.
6. Place the upper door on a smooth surface with its panel upwards. Loose screw
②
and
part
①
, then Install them to the left side and tighten securely.