8Kg, 220-240V~50Hz
6
1.
Before contacting an Authorised Service Provider for the installation of the dryer, check
the information in the user manual to make sure that the electrical installation and
water outlet is suitable. If they are not, call a qualified electrician and a plumber to have
the necessary adjustments made.
2.
It is the customer’s responsibility to prepare the dryer’s installation place, as well as the
electricity and waste water installation. Before installation, check the dryer for damage.
If damaged, do not have it installed. Damaged products may endanger your health.
3.
Install the dryer on a stable and flat surface.
4.
Run the dryer in a dust-free environment where the air ventilation is good.
5.
The clearance between the dryer and the floor should not be reduced with objects such
as carpets, wood or tape.
6.
Do not block the ventilation grills found on the plinth of the tumble dryer.
7.
The appliance must not be installed behind a lockable door, a sliding door or a door with
a hinge on the opposite side of the tumble dryer, in such a way that blocks the full
opening of the tumble dryer door.
8.
Once the dryer has been installed, the connections must remain stable. When installing
the dryer, make sure that the rear surface is not leaning on anything (e.g. tap, socket).
9.
The operating temperature of the dryer is +5°C to +35°C. If operated out of thi
temperature range, the performance of the dryer will be affected negatively and the
product will be damaged.
10.
Be careful when carrying the product since it is heavy. Always wear safety gloves.
11.
Always install the product should be placed against a wall.
12.
The rear surface of the product should be placed against the wall.
13.
When the product is placed on a stable surface, use a water level to check if it is fully
stable. If not, adjust the feet until it becomes steady. Repeat this process every time you
relocate the product.
14.
Do not place the dryer onto the power cable.
IV.
INSTALLATION
