34
VI.
INSTALLATION
Important!
For electrical connection carefully follow the instructions given in specific paragraphs.
Unpack the appliance and check if there are damages on it. Do not connect the appliance
if it is damaged. Report possible damages immediately to the place you bought it. In that
case retain packing.
It is advisable to wait at least four hours before connecting the appliance to allow the oil
to flow back in the compressor.
Adequate air circulation should be around the appliance, lacking this leads to
overheating. To achieve sufficient ventilation, follow the instructions relevant to
installation.
Wherever possible the spacers of the product should be against a wall to avoid touching
or catching warm parts (compressor, condenser) to prevent possible burn.
The appliance must not be located close to radiators or cookers.
Make sure that the mains plug is accessible after the installation of the appliance.
Any electrical work required to do the servicing of the appliance should be carried out by a
qualified electrician or competent person.
This product must be serviced by an authorized Service Center, and only genuine spare
parts must be used.
Don
’t put hot food in the appliance.
Don
’t
pack food close together as this prevents air circulating.
Make sure food don
’t
touch the back of the compartment(s).
If electricity goes off, don
’t open the door(s).
Don
’t open the door(s) frequently.
Don’t
keep the door(s) open for too long time.
Don
’t
set the thermostat on exceeding cold temperatures.
All accessories, such as drawers, shelves, door balconies should be kept in original place for
lower energy consumption.
VII.
SERVICE AND ENERGY SAVING
