400W, 50/60Hz, 220-240V
11
When pressing food with the pushing bar, force shall be even or indirect, pressing force shall not
be more than 1 kg, no too sudden force, otherwise, juicing effect will be reduced.
B. Blender
First check the position switch in stop state (the switch shall be in stop position)
Put sealing ring into cutter seat slot, screw and fasten mixing cup into cutter seat,
then put the mixing cup cover and feed cover on. Rotate clockwise for fastening
and counterclockwise for loosening.
Clockwise screw the cutter seat into the main machine with your hand, not holding
the cup with your hand for disassembling, otherwise, the cup will leave the cutter
seat and the food in the cup leak out.
Egg mixing
Put the eggs without eggshell into the mixing cup, put and fasten the cover, then press the button of weak
grading for 1 min.
Vegetables or fruit mixing
For vegetable or fruit to be mixed, after peeling or shelling and pitting, put every time 250g to 350g.
C. Chopper
Meat mincing
Screw mincing cup into cutter seat (clockwise)
For meat to be processed, remove tendon, bones and skin; wash cleanly, cut into
small pieces of 2 centimeter squares, put every time 200g
into the mincing cup.
During mincing, you can pour some edible oil or flavoring, which will produce better
results.
If rotating speed slows abruptly due to much meat quantity or tendon entangling blade, please
turn down the machine, cut off power supply and adjust meat quantity or remove tendon.
