400W, 50/60Hz, 220-240V
12
D. Grinding
Grinding cup is applicable to dried food to be ground into powder. Put 150 g
into the grinding cup every time.
Cover the grinding cutter seat, fasten tight clockwise; mount them on the main
machine according to the position shown in the diagram.
When grinding sesame, walnut and other oily food, adding a spoon of
granulated sugar into the grinding cup for grinding together will produce
better results.
In case of idling during grinding, i.e., when the cutter does not contact food, immediately stop,
cut off power supply. Mix the food more softly, then turn on for grinding again.
This machine is designed with button switches of O grading, I grading, II grading and “*” inching
-
O for stop,
-
I for weak grading,
-
II for strong grading
-
“*”for inching.
For mincing, cutting up and grinding, select inching and strong grading
For operating time, take the principle of running for 10seconds and stopping for 5seconds.
After using for 1min, stop for 1 min, then use again.
For mixing vegetables, fruits or soy milk, select inching or strong grading.
For mixing eggs, select weak grading.
For juicing, select strong grading, for operating time, after operating for 1min, stop for 1min,
then use again.
After the above operation is performed for three times, stop for 15 min, do not operate until
the motor is cooled
In this way, service life of this machine will be prolonged, the machine will serve you more
efficiently.
VII.
CLEANING AND MAINTENANCE
This machine shall be often used, so as to keep the motor dry and clean.
If not using for a long time, please store this machine at a dry and well-ventilated place so as to prevent the
motor from being damped and going moldy.
Do not wash the main body. When cleaning, only wipe with wet cloth. Other components may be washed
directly with water, such as pushing bar, cover, middle seat, residue cup, juice nozzle cover.
