www.heinner.com
200W, 50Hz, 220-240V
12
VI. USING INSTRUCTIONS
01. For first use, clean the blades for kneading and emulsifying palettes. Before
assembling the mixer, make sure the power cord is unplugged and the selector lever is
in position "0".
02. Assemble mixer's beaters appropriate food process.
03. Make sure the speed selector knob to "0", then connect the power supply, the
indicator will light, and it will go only when disconnecting the power supply.
04. Turn the speed selector to the desired setting.
05. Maximum operating time should not exceed 3 minutes. Idle time is less than 20
minutes. This time is maintained between two cycles continue.
06. When the mixing is finished, turn the speed selector to "0", and then unplug the
power cord from the outlet.
07. If necessary, you can remove excess food particles from the blades with a rubber
spatula or wooden.
08. Keep the blades with one hand and press the Eject button down firmly with the
other hand.
Note: Remove the kneading blades and vanes for emulsifying only when the selector
lever is in position "0".
Note: During operation, you can put the vertical mixer (see figure below) but make sure
the selector lever is in "0".