1000W, 50/60Hz, 220-240V
23
19.This appliance cooks under pressure. Scalds may result from inappropriate use
of the pressure cooker. Make sure that the cooker is property closed before
applying heat, see “instructions for use”.
20.Never forces open the pressure cooker. Do not open before making sure that
its internal pressure has completely dropped. See the “instructions for use”.
21.Never use your pressure cooker without adding water or food, except the
Sauté function, this would seriously damage it.
22.Do not fill the cooker beyond 2/3 of its capacity. When cooking foodstuffs which
expand during cooking, such as rice or dehydrate vegetables, do not fill the cooker
to more than half of its capacity.
23.Use the appropriate heat source(s) according to the instructions for use.
24.After cooking meat with a skin (e. g. ox tongue) which may swell under the
effect of pressure, do not prick the meat which the skin is swollen; you might be
scalded.
25.When cooking doughy food, gently shake the cooker before opening the lid to
avoid food ejection.
26.Before each use, check that the valves are not obstructed. See the instructions
for use.
27.Never use the pressure cooker in its pressurized mode for deep or shallow
frying of food.
28.Do not tamper with any of the safety systems beyond the maintenance
instructions specified in the instructions for use.
29.Only use manufacturer's spare parts in accordance with the relevant model. In
particular, use a body and a lid from the same manufacturer indicated as being
compatible.
30.This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
31.State that the container must not be opened until the pressure has decreased
sufficiently.
32.The appliance is not intended to be operated by means of an external timer or
a separate remote-control system.
33. Warning: Avoid spillage on the connector.
34. If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacture or its service agent.
35.KEEP THESE INSTRUCTIONS.
