1000W, 50/60Hz, 220-240V
35
VI. CLEANING AND MAINTENANCE
1.Clean after each use.
2.Before cleaning product, please unplug the power cord until the product cools.
3.Remove the inner pot after opening the lid correctly, first clean with detergent, then
rinse well with water, and wipe dry with a soft cloth.
4.Remove the removable cover plate, and rinse with water. After the cleaning is
completed, replace the removable cover plate, otherwise normal working is
impossible.
5.Remove the exhaust valve and the float valve, rinse with water, and put them into
the original positions.
6.Remove and clean the water storage box, and then put it into the original position.
7.Check the float valve port and the exhaust valve port for blockage, and clean the
keep warm seat plate with a rag.
8.Wipe clean the lid and the cooker body with a rag, and it is prohibited to soak the
cooker body in water or spray water to it.
9.After cleaning and maintenance is completed, please check again the removable
cover plate, exhaust valve, float valve and other components for correct installation.
Disassemble and install the block proof cover and seal ring
1.
Check if the seal ring and block proof cover are correctly installed in the upper
cover before use each time.
2.
After use, please clean the seal ring and around of block proof cover for avoiding
jamming the cover, keep it clean to avoid bad odor.
1.
Please do not pull the seal ring, otherwise, the distorted seal ring may influence the
seal ring and pressure effect.
Also, very important, in order to avoid impregnation
of bad odours, when cleaning the seal ring you can use the following: lemon
juice, vinegar, sodium bicarbonate.
2.
Do not use the damaged seal ring, please replace it at authorized repair office.
Disassemble and install
the block proof cover
Block proof cover
Disassemble and install
the seal ring
Seal ring
Disassemble
Pull it upwards
Install
Press it down to install
Disassemble
Pull it upwards
Install
Press it down to install
