www.heinner.com 1200W, 50Hz, 220-240V
4
V. USING INSTRUCTIONS
1. Connect the hose with vacuum cleaner.
Insert flexible hose into the air-intake. Press the knob until it clicks into the position.
Remove the flexible hose. Unplug the appliance and press the knob at the end of the
hose. Remove it from the air-intake opening.
2. Fit the telescopic to the angled pipe.
3. Fit the floor brush to the telescopic tube.
OPERATION
1. A yellow mark on power cord shows the ideal cable length. Do not expend the
cable beyond the red mark.
2. To rewind the power cord, press the rewinder pedal with one hand and guide the
cord with the other hand.
3. Press the power switch to switch the appliance on.
4. Use the electronic speed adjusting to control the suction power of the cleaner.
5. The suction power can be adjusted with the sliding control on the angled pipe too.
6. Put the telescopic tube into the fixing hook of the appliance when you have a
break.
Caution
: Do not transfer the appliance when the fixing hook is used.
Crevice tool
For cleaning corner edge and draws etc. Where is difficult to reach, such as gaps and
the keyboard, bookshelf and windows.
Floor brush
Use of the selector on floor brush. Bristles extended for carpets. Bristles retracted for
hard floors.
If the angled pipe has blockage. Insert it into the air-intake and switch the appliance
on.
