ROTARY HAMMER
•
The brushes and commutator in your tool have been engineered for many hours of
dependable service. To maintain peak efficiency of the motor, we recommend every two
to six months the brushes be examined.
•
A damaged dust cap should be changed immediately.
We recommend having this carried
out by an after-sales service.
•
Store the tool, operating instructions and where necessary the accessories in the original
packaging. In this way you will always have all the information and parts ready to hand.
Changing the carbon brushes
1. Loosen the two screws using a screwdriver and remove the tail cover.
2. Take out the brush holder and the worn carbon brushes.
3. Insert the new brushes in the brush holder.
4. Reinstall the brush holder and the tail cover.
SERVICE
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment
should be performed by Factory Service Centers.
DISPOSAL
The tool, accessories and packaging should be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment
and its implementation into national right, power tools that are no longer usable must be
collected separately and disposed of in an environmentally correct manner.
Screw
Tail cover
Brush holder
Fig. 11
