18
GASOLINE TILLER
If the milling cutters do not move or work properly:
Problem
Probable cause
Corrective action
The milling cutters do not turn
Extraneous matter in the milling cutters
Remove extraneous matter
Loose milling cutters. The milling cutter’s
bolt is loose.
Tightly place the bolt.
Incorrect clutch adjustment or Broken
cable
Send your machine to the service
technician
Internal transmission problem
Send your machine to the service
technician
The milling cutters don’t Break
into the earth
Milling cutters incorrectly placed, the
edges are placed in the wrong direction
Send your machine to the service
technician
In the case of not being able to solve the problem, take your machine in for a service check. To locate the
after-sales service nearest to your location, please contact the point of sale where you purchased the
machine.
10. TRANSPORT
•
Never lift or transport the rotary tiller while the engine is running. It is necessary to always turn off the
engine when transporting the machine between different working areas.
•
Once the machine is turned off, wait 5 minutes to allow it to cool before tr
ansporting it. The machine’s
exhaust pipe will remain hot after turning off the engine.
•
To transport the machine, lower transport wheel and rest the machine on it. Lift the handlebar with both
hands so that the milling cutters do not touch the ground and push the machine, so it moves onto the
transport wheel.
•
If you have to raise the machine, check the weight of the machine in the technical characteristics before
lifting it to ensure that it is a weight that you can withstand.
•
If you are transporting the rotary tiller in vehicles, secure it firmly to prevent it from slipping or tipping
over.
11. STORAGE
•
Once the machine is off, wait 5 minutes for it to cool down before storing the machine.
•
The machine’s exhaust pipe will remain hot after turning the
engine off. Do not ever store the machine in
places near flammable materials (dried grass or wood...), gas or fuels.
•
Be sure to store the machine in a place not accessible to children or that it creates possible danger for
anyone and that is dry, clean and at a temperature between 0º C and 45° C.
•
Before storing the machine follow the directions in the maintenance chapter.
•
If you plan to store the machine in a closed place, first empty the fuel. Vapors could come into contact
with a flame or hot body and ignite. If the fuel tank has to be emptied, this must be done outdoors and
according to the regulations of recycling.
•
To reduce the risk of fire, keep the engine, muffler and fuel tank clean by eliminating the remains of cut
material, oil and grease.
12. RECYCLING OR DISPOSAL OF YOUR MACHINE
•
Protect the environment. Recycle this machine’s used
oil by taking it to a recycling center. Do not
pour used oil in drains, land, rivers, lakes, or seas.
•
Dispose of your appliance sustainably. We should not get rid of machines with domestic waste.
Plastic and metal components can be classified according to their nature and recycled.
•
The materials used to pack this machine are recyclable. Please do not throw the packaging away
with domestic trash. Throw these packages away at an official collection point.
