Assembly instructions
5.
7.
8.
6.
Unfold the rear wheel axle
of the rear wheel ("K").
Turn the rollator so that
the handles ("F") are facing
up. Pull the bracket off the
bolt (“I”) from the inside of
the rear wheel and pull the
bolt (“I”) out.
Fasten the bracket over the
unfolded rear wheel axle
("K"). Then pull the bracket
over the end of the bolt ("I").
Repeat steps 5 - 8 for the
second rear wheel.
Fasten the rear wheel axle
("K") with the previously
loosened bolt ("I"). To do
this, insert the bolt into
the provided hole.
User instructions |
9
