Assembly instructions
1.
3.
4.
2.
Remove the wing
screws on the frame
("K") marked "RB" on
the rollator.
Remove the rollator from
the packaging and remove
the protective foils. Spread
out the parts for assembly
as shown.
Fasten the rear wheel
axle with rear wheel
("L") with the
previously loosened
wing screw ("K").
Insert the rear wheel axle
with rear wheel ("L") with
the marking "RB" into the
frame at the corresponding
marking "RB". Both
markings point to the outer
side of the rollator.
6
| User instructions
