background image

2

®

INTRODUCTION

INTRODUCTION

Thank you for purchasing the Heli-Max 230Si Quadcopter. We are certain 

you will get many hours of enjoyment out of this model. If you should have 

any questions or concerns please feel free to contact us at: helihotline@
hobbico.com.

 

For the latest technical updates or manual corrections visit 

the Heli-Max web site at www.helimax-rc.com. If there is any new technical 

information, changes or important updates to this model a “tech notice” box 

will appear on the 230Si product page. Click the “tech notice” box to learn 

more about this important update.

When you see this symbol, please pay special attention 

and heed all warnings regarding the information within.

®

TECHNICAL SUPPORT

TECHNICAL SUPPORT

Please note that we cannot provide you information on the pricing you will 
fi nd in your local retailer’s store for any products.

If you need technical support or have any questions, you can reach us by 
one of the following means. When contacting us, please include the name of 
the product you are referring to, its stock number and as much information 
about your question or issue as possible.

For support outside the U.S. or Canada, please contact the distributor in your 
country. If unable to contact the appropriate distributor, please contact us. 
However, we are unable to respond to emails in languages other than English.

Email

Email us at 

helihotline@hobbico.com

. Please try to include as much 

information as possible when asking your question. Also please be sure 

to list your full email address (ex: johndoe@aol.com) as well as at least one 
other means of daytime contact in your email.

Phone

1-217-398-8970

 Select option 6. 

Available Monday-Friday, 8am-5pm 

U.S. Central Time.

Fax

1-217-398-7721

 Please be sure to 

include a daytime telephone number 
or return fax number so that we can 
contact you.

Regular Mail

If you prefer, we can always respond with a regular mailed letter. Simply write 
to us, including a brief explanation of your problem or question along with the 
product name you are referring to. Use the Hobby Services address below.

Summary of Contents for 230Si





















Reviews: